F.A.Q.
HOME > F.A.Q.
UGN-6080Data LoggerE69
 
UGN-6080
1. Did you unplug the USB cable after you done the settings ? YES
2. Did you use the same simcard of your telecom company provided to you ?
it must be same as the APN simcard company.
YES
3. GPS signal seems no activated , pls put your GPS antenna to the right place ( near window ) or outside of window . YES
4. GPRS is open or not ? pls check as well.---- HOW TO CHECK WHETHER GPRS OPEN OR NOT
   
Q : Fundamentally how do we use $smstrk - all other Q come after them. This command does not work.
A : The attached file is the new version of
configuration program, we take out the report times
field for the SMS tracking command. Besides, you have
to send the following three command to have unit
working properly:
1. $gprstrk,0,0,0,0<CR><LF>
2. $server1,[Your Mobile Phone Number],0,,<CR><LF>
3. $smstrk,1,30,60,20<CR><LF>

Note1: the first command switches off the GPRS tracking function.
Note2: the second command sets the mobile phone number for the GSM modem which is connected to server, and switch off the internet connection.
Note3: the third command sets the SMS tracking parameters.
   
Q : From what mobile / Cell phone / phone can we send the sms ? or can we sent it from any number with the password.
A : when unit left the factory, the password is empty, so user is able to send SMS command to unit from any number mobile phone.
Since all units left factory with empty password, user can send SMS command to unit without password.
For security reason, we strongly recommend to set the password for each unit, please set password with $userpw,[New password]<CR><LF> command.
After password has been set, user is able to use any mobile phone to send command to unit with password.
   
Q : The time sent by the unit is GMT, since we set the time zone. Why does the unit not sent local time in the response data.
A : Since vehicle could travel across to a different time zone, the data send to server should be GMT time; while the alert data sent to user could be a local time.






Data Logger
1.
if have Geographic survey application ,?
 
how it works if it is have this function
UBS-110 can display log in the Google Earth , Google Earth have the Geographical survey .
2.
Are logged data protected by password? No.
3.
Can we download the data from the device via Bluetooth Wireless Modem to PC?
 
(No Physical touching) No , the type of Bluetooth is used for low level application . So the performance is not good at data transmission
4
If yes, then what will be the range of wireless modem for accessing to the tracking unit?
 
(Like the Bluetooth Enabled Palm Pilots
5.
Will it show the vehicle route on GooGle Earth PC Based Software?
 

Yes , there is a option that can download the route to Google Earth




 

E69
Q:
Does the pager remain connected to the GSM network at all times ?
A:
Yes, the pager is always connected whether the alarm is armed or disarmed. The only time the pager is not connected to the network is when there is no cellular coverage, in ‘Standby’ or the pager’s power is disconnected.
Q:
If the red LED lights solid, what does this mean ?
A:
It indicates that there is no cellular coverage at your location and is a warning that text messages cannot be sent or received.
Q:
Will the pager flatten my vehicle battery ?
A:
The pager nominally consumes 10mAmps and a battery in good fully charged condition is not affected under normal vehicle usage. Power consumption reduces to 5mAmps when in Standby.
Q:
If I turn off the pager’s power, do I have to re-initialise it when power is restored ?
A:
No, the pager remembers the last setting, but it is recommended to re-send the initialising code to confirm the pager is functioning normally.
Q:
Can the pager send text messages to more than one mobile phone ?
A:
No, it is dedicated to send messages to just one mobile phone. You can select or change which phone receives the warning text messages.
Q:
What happens if the someone calls the pager by mistake (voice or text) ?
A:
Nothing, the pager ignores voice calls and all text messages not commencing with your password.
Q:
Does a Pre-Pay SIM card have to be removed from the pager to re-charge it ?
A:
Not necessarily, but check with the SIM card supplier. Some cards have to be removed to be recharged.
Some card suppliers offer Auto-Pay which automatically re-charges the card when its value drops below a minimum value. (Check with your card supplier)
Q:
What happens if my Pre-Pay SIM card has no credit remaining ?
A:
The pager will not send any messages - of any type.



 


Use Link Group Co., Ltd.
Head Office (Taiwan)

11F.-6, No.432, Sec. 1, Keelung Rd., Xinyi Dist., Taipei City 110, Taiwan (R.O.C.)
TEL : 886-2-27588816   FAX : 886-2-27582006

Factory Location
THAILAND : No.9 Soi Koo Bon 31, Lane 8, Koo Bon Road,Kunnayao District , Bangkok , 10230 Thailand.
TEL : 66-2-9434052   FAX : 66-2-9434395
China : Fuhai,Cixi,Zhejiang, China

E-Mail : fkkchang@seed.net.tw ; sales@uselink.com.tw